RE: Order release splitting in v5.5 bulk planning (load config)

Mauricio,

You may not want to put your bundling parameter to "do not bundle" or you
will not be able to consolidate orders with the same OD pair for delivery on
the same date and probably lose some cost saving opportunities.

Couple of things you can check is:

Planning parameter set - look at your planning parameter setup and check to
see that " ALLOW SMALL DIRECT ORDERS TO BE SPLITTABLE" is set to false.

On your order release ship unit - make sure the "splittable" flag is not
set.

On your itinerary - make sure it's a multistop itinerary as well make sure
your leg is set to "Auto consolidation type = Multistop into one equipment"

In your container opt config - Minimize Number of Containers = true, and
Maximize Container Utilization = false

Probably a couple of other things you can check but this all that comes to
mind at the moment without looking at your log files.

Good luck..


Miguel

-----Original Message-----
From: owner-otmsig (AT) solutionbeacon (DOT) net
[mailtowner-otmsig (AT) solutionbeacon (DOT) net] On Behalf Of Mauricio Ramirez
Sent: Tuesday, December 12, 2006 10:13 AM
To: otmsig (AT) solutionbeacon (DOT) net
Subject: RE: Order release splitting in v5.5 bulk planning (load config)

We've had an SR open with Oracle support for a few weeks but I was hoping
this was a setup issue and not a bug.

Thanks,

Mauricio

-----Original Message-----
From: owner-otmsig (AT) solutionbeacon (DOT) net
[mailtowner-otmsig (AT) solutionbeacon (DOT) net] On Behalf Of Rick v100
Sent: Tuesday, December 12, 2006 7:24 AM
To: otmsig (AT) solutionbeacon (DOT) net
Subject: Re: Order release splitting in v5.5 bulk planning (load config)

Actually I think this was already reported.

Rick

--- Paul Franz <paul.franz (AT) oracle (DOT) com> wrote:

> I would recommend contacting Tech Support because it
> sounds like a bug
> to me.
>
> Paul Franz
>
> Mauricio Ramirez wrote:
> >
> > All,
> >
> > We are implementing OTM (GC3) v 5.5 and using 3D
> load configuration
> > and we are experiencing bulk planning results in
> which our order
> > releases are being split across multiple
> shipments. We have a
> > requirement where we cannot allow our order
> releases to be split yet
> > we still want the planning engine to consolidate
> multiple order
> > releases into multi-stop shipments. Has anyone
> else experienced this
> > problem? If we select the constraint on the
> individual order release
> > to "Do Not Bundle" as the bundling type then it
> seems to reduce to
> > amount of orders that are being split but by in
> large we're still
> > experiencing the issue. We would expect our order
> releases to be split
> > if the order was too big to fit into one
> equipment, but we're seeing
> > order releases that are close to a full truck
> being split across
> > multiple shipments and combined with other order
> releases. Any
> > recommendations/suggestions would be appreciated.
> >
> > Thanks,
> >
> > Mauricio Ramirez
> > Lucidity Consulting Group LP
> > 214-336-9189 Mobile__
> > 425-675-8676 Fax
> >
> > www.luciditycg.com/video
> <http://www.luciditycg.com/video>
> >
> > This e-mail and any files transmitted with it are
> the property of
> > Lucidity Consulting Group LP, are confidential,
> and are intended
> > solely for the use of the individual or entity to
> whom this e-mail is
> > addressed. If you are not one of the named
> recipient(s) or otherwise
> > have reason to believe that you have received this
> message in error,
> > please notify the sender at (214) 336-9189 and
> delete this message
> > immediately from your computer. Any other use,
> retention,
> > dissemination, forwarding, printing or copying of
> this e-mail is
> > strictly prohibited. Unless expressly stated in
> this e-mail, nothing
> > in this message should be construed as a digital
> or electronic signature.
> >
>
> You are receiving this mail as a subscriber of the
> Oracle Transportation
> Management SIG List Server. This list is provided by
> Solution Beacon,
> LLC for the Oracle Transportation Management SIG to
> facilitate distribution
> of issues and topics related to Oracle
> Transportation Management. If you
> do not want to receive future mail from the list,
> send email to
> majordomo (AT) solutionbeacon (DOT) net with the words
> "unsubscribe otmsig" (without
> quotes) in the body of the email.
> If you need help, please contact
> mweiss (AT) solutionbeacon (DOT) com.
> Thank you!
>




__________________________________________________ __________________________
________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com

You are receiving this mail as a subscriber of the Oracle Transportation
Management SIG List Server. This list is provided by Solution Beacon,
LLC for the Oracle Transportation Management SIG to facilitate distribution
of issues and topics related to Oracle Transportation Management. If you
do not want to receive future mail from the list, send email to
majordomo (AT) solutionbeacon (DOT) net with the words "unsubscribe otmsig" (without
quotes) in the body of the email.
If you need help, please contact mweiss (AT) solutionbeacon (DOT) com.
Thank you!


You are receiving this mail as a subscriber of the Oracle Transportation
Management SIG List Server. This list is provided by Solution Beacon,
LLC for the Oracle Transportation Management SIG to facilitate distribution
of issues and topics related to Oracle Transportation Management. If you
do not want to receive future mail from the list, send email to
majordomo (AT) solutionbeacon (DOT) net with the words "unsubscribe otmsig" (without
quotes) in the body of the email.
If you need help, please contact mweiss (AT) solutionbeacon (DOT) com.
Thank you!


You are receiving this mail as a subscriber of the Oracle Transportation
Management SIG List Server. This list is provided by Solution Beacon,
LLC for the Oracle Transportation Management SIG to facilitate distribution
of issues and topics related to Oracle Transportation Management. If you
do not want to receive future mail from the list, send email to
majordomo (AT) solutionbeacon (DOT) net with the words "unsubscribe otmsig" (without
quotes) in the body of the email.
If you need help, please contact mweiss (AT) solutionbeacon (DOT) com.
Thank you!